Universal ECU V2 Power- FADEC/ECU for micro jet engines
Universal ECU V2 Power- FADEC/ECU for micro jet engines - Image 2
Universal ECU V2 Power- FADEC/ECU for micro jet engines - Image 3
Universal ECU V2 Power- FADEC/ECU for micro jet engines - Image 4
Universal ECU V2 Power- FADEC/ECU for micro jet engines - Image 5
Universal ECU V2 Power- FADEC/ECU for micro jet engines - Image 6
Universal ECU V2 Power- FADEC/ECU for micro jet engines - Image 7
Universal ECU V2 Power- FADEC/ECU for micro jet engines - Image 8

Universal ECU V2 Power- FADEC/ECU for micro jet engines

185 $

  1. New and Improved ECU
  2. Escape32 ESC for Brushed and Brushless motor drivers builtin
  3. Works with 2-7S Lipo Input and output
  4. Faster response
  5. Dual RPM Input
  6. Dual Thermocouple input
  7. Built in Kero Plug Driver for positive drive. Can drive one wire Kero Plugs with grounded body
  8. Serial control possible
  9. Online firmware updates for staying current and ability to develop and deploy custom firmwares remotely

2 in stock

SKU: 1016 Category:

Description

New and improved universl ECU from DigiPak Jets with motor drivers builtin

  1. Buil in starter motor and fuel pump motor driver. Builtin EScape32 based ESC is capable of driving brushed or brushless motors for starter and fuel pump.MR60 connector with  upto 40Amps can be supported by ESC for brushless motor.
  2. Ability to handle higher input and output voltage. 2-7S Lipo
  3. MR30 connectors for Servo and RPM Input. XT30 Connection for solenoids and keroplug. MR60 connector for starter motor and fuel pump.
  4. Buil in Fuel solenoid and Gas Solenoid Driver
  5. Builtin Kero Plug/Glow Plug Driver able to handle Kero plug of around 12V and 15Amps
  6. Kero plug controlled using positive voltage so grounded kero plugs or single wire kero plugs can now be controlled
  7. Dual RPM Input. Any can be chosen as primary input
  8. Ability to use garrett type RPM sensor used in turbochargers. Any counts per revolutions can be entered in software now in addition to standard 1 or 2 counts per revolution
  9. Dual Thermocouple input. Any can be chosen as primary input
  10. Ability to regulate voltage on all outputs i.e. Starter, FuelPump, Glow Plug, Gas Solenoid and Fuel Solenoid using PWM
  11. Programmable error response . i.e Continue or abort in case of RPM or Temp sensor failure
  12. Ability to control engine through serial input as well as change settings
  13. Ability to update firmware over internet for future updates
  14. Improved firmware with faster control loop
  15. Glow/Kero Plug, Fuel Solenoid Valve, Gas/Kero Valve powered by ECU,
  16. Starter and Fuel Pump controlled using external ESC which allows Brushed or brushless starter/and or fuel pump combination to be possible

DigiPak Universal ECUV2Power Manual

Case 3PowerSTLFiles  (Print your own 3D Printed Case)

Packing List:

1xECU V2Power

1xinductive RPM Sensor

Cables and connectors

Related products