Universal ECU V2 Power- FADEC/ECU for micro jet engines

Description

New and improved universl ECU from DigiPak Jets with motor drivers builtin

1. Buil in starter motor and fuel pump motor driver. Capable of driving brushed or brushless motors for starter and fuel pump. Upto 40Amps can be supported by ESC for brushless motor.
2. Buil in Fuel solenoid and Gas Solenoid Driver
3. Builtin Kero Plug/Glow Plug Driver able to handle Kero plug of around 12V and 15Amps
4. Kero plug controlled using positive voltage so grounded kero plugs or single wire kero plugs can now be controlled
5. Dual RPM Input. Any can be chosen as primary input
6. Ability to use garrett type RPM sensor used in turbochargers. Any counts per revolutions can be entered in software now in addition to standard 1 or 2 counts per revolution
7. Dual Thermocouple input. Any can be chosen as primary input
8. Ability to regulate voltage on all outputs i.e. Starter, FuelPump, Glow Plug, Gas Solenoid and Fuel Solenoid using PWM
9. Programmable error response . i.e Continue or abort in case of RPM or Temp sensor failure
10. Ability to control engine through serial input as well as change settings
11. Ability to update firmware over internet for future updates
12. Improved firmware with faster control loop
13. Glow/Kero Plug, Fuel Solenoid Valve, Gas/Kero Valve powered by ECU,
14. Starter and Fuel Pump controlled using external ESC which allows Brushed or brushless starter/and or fuel pump combination to be possible

DigiPak Universal ECU V2 Manual(U1)

Packing List:

1xECU V2Power

1xinductive RPM Sensor

Cables and connectors