Description
This board is based on ESP32 microcontroller and comes with ECU Firmware 12 pre loaded.
For a fully functional controller you will need to add ESC’s (Electronic Speed Controllers) for Starter Motor and Fuel Pump. You will also need a glow plug or Kero Plug driver module. In this ECU you do not need to use external max31855 K type sensor board as it is already builtin. All you need is a k type thermocouple probe to measure temperature.
It takes RPM input as a 3.3-5volt square wave and can work with 1 pulse per revolution or 2 pulse per revolution RPM sensors. The type of sensor can be selected from setting menu.
The ECU settings can be modified and sensor data can be monitored through a built in WiFi Web Server.
ECU Guide: ECU Rev11 Guide
Reviews
There are no reviews yet.